DinLCE1: Level Control

R459.00

Description

This controller is used for ‘filling’ or ’emptying’, single or two level applications.
Applying power to the Controller, illuminates the Green LED.

3 Probes (2 levels) – The unit relay will remain de-energised until the liquid rises above the Low & High probes. When both the Low & High probes are immersed, the unit relay will energise, the Red LED illuminates & the state of the contacts changes. The unit relay will remain energised until the level drops below the Low probe. The Red LED will go out & the state of the contacts changes.

2 Probes (1 Level – On/Off control) – Use the Ground Probe & the High Probe only. When both these 2 probes are immersed, the unit relay will energise, the Red LED illuminates & the state of the contacts changes. The unit relay will remain energised until the level drops below either probe. The Red LED will go out & the state of the contacts changes.

 

Reviews

There are no reviews yet.

Be the first to review “DinLCE1: Level Control”

Your email address will not be published. Required fields are marked *